Frintelis

Lane should-cost · Spain → France

What does a Barcelona–Lyon full truckload cost?

A 640 km lane via La Jonquera and the Rhône valley, rebuilt from the road up: fuel, driver time, tolls, the truck and the carrier's margin. The result is what the work costs to perform, which is the number to hold a quote against.

Published 13 November 2026 · Lane: Barcelona (ES) → Lyon (FR) · Equipment: standard curtainsider semi-trailer · Fuel basis: week of 28 September 2026

€1,395Should-cost / trip
€2.179Per loaded km
€42.27Per pallet (33)
75%Fuel, labour, tolls

The short answer

The modelled should-cost of a Barcelona to Lyon full truckload is €1,395 per trip, or €2.179 per loaded kilometre, on a Spanish driver base and diesel at €2.15 per litre. Driver labour is the largest element at €493, followed by fuel at €463 and tolls at €97. A quote for this lane can be read against that figure line by line.

What assumptions is the lane costed on?

Model inputs. Every figure on this page follows from this table. Distance and country split are planner figures for the route described; drive time comes from the engine's distance model.
InputValue used in the model
Origin → destinationBarcelona (ES) → Lyon (FR), via La Jonquera and the Rhône valley
Lane distance640 km loaded — ES 160 km, FR 480 km
Empty running100 km → 740 effective km
EquipmentStandard curtainsider semi-trailer · 90 m³ · 33 pallets · 24 t payload · 3 years old
Labour baseSpanish driver · 2.0 driver days · per diem applied separately
Fuel€2.15 / litre (week of 28 September 2026, origin and destination average) · 29.1 l/100 km · 215 litres per trip
Loading / unloading2 hours + 2 hours, no chargeable waiting
Driving time10 h 52 including statutory breaks (EU 561/2006)
TollsPer-country distance tariffs, 40 t five-axle Euro VI, net of VAT (ES · FR)

Where does the money go?

Bar chart of the nine cost elements of a Barcelona–Lyon truckload, led by driver labour at €493, fuel at €463 and tolls at €97.
Cost breakdown as returned by the Frintelis should-cost engine. € / km is per loaded kilometre.
Cost element€ / km€ / tripShare
Driver labour — Spanish driver0.77149335.4%
Fuel0.72346333.2%
Tolls0.151976.9%
Maintenance & tyres0.111715.1%
Depreciation0.104664.8%
Profit margin0.104664.8%
Overhead (SG&A)0.080513.7%
Per diem0.078503.6%
Insurance & taxes0.058372.7%
Total should-cost2.1791,395100%

Reading the stack

How much are the tolls between Barcelona and Lyon?

Toll per country for a 40-tonne, five-axle Euro VI combination, net of VAT.
CountrykmToll€ / km
Spain160€130.078
France480€840.175
Total640€970.151

What could move the number?

Each row is a full re-run of the model with one input changed.
ChangeEffect / tripvs baseCommercial question
Diesel +10%+€51+3.6%Which index, baseline and adjustment frequency apply?
French driver base instead of Spanish+€30+2.1%Which establishment country does the offer assume?
Empty running +100 km+€121+8.7%Can the carrier evidence its backhaul on this lane?
Three chargeable waiting hours+€145+10.4%When does detention start, and at what hourly rate?
Margin +2 points+€27+1.9%Is margin taken on cost or on revenue?

The lane is costed on a Spanish driver base, the origin country. Run on a French driver base the same trip models at €1,425, which is €30 higher. The establishment country behind an offer should be stated, not assumed.

Three chargeable hours of waiting cost €145, about €48 an hour. If a quote carries a dwell contingency, it belongs in a detention clause with a free period and an hourly rate, where it is paid only when the delay happens.

What does the lane cost per pallet?

The same trip in the units that travel into a category P&L, at full utilisation.
UnitAt should-cost
Cost per trip€1,395
Cost per loaded km€2.179
Cost per pallet (33 pallets)€42.27
Cost per m³ (90 m³)€15.50
Cost per kg (24 t payload)€0.058

How to read a quote against it

Fuel, labour and tolls are €1,053 of the €1,395: road cost that any compliant carrier on this lane has to absorb. The commercial conversation concerns the remaining €342 of asset, overhead and margin.

Four questions to take into the carrier meeting

  1. Which labour-cost base and establishment country does the offer assume?
  2. How much empty running is priced in, and what network evidence supports it?
  3. Which items are fixed, which indexed, and which treated as verifiable pass-through?
  4. What loading and waiting time is included in the linehaul, and when does detention begin?
Interpretation note

A should-cost result is a decision anchor, not a price ceiling. Market imbalance, capacity, service conditions and carrier network economics can all justify a rate above the model. The purpose is to know how much of a quote the carrier is being asked to explain.

Method and scope

Figures are produced by the Frintelis should-cost engine from the lane inputs in the assumptions table and a dated European reference set covering fuel, labour, toll, asset, maintenance and overhead cost. The model is deterministic: identical inputs return an identical result. Fuel prices are pump prices from the EU Weekly Oil Bulletin for the week of 28 September 2026; tolls are net of VAT.

This is a cost model, not a market price index. It does not observe transacted rates and it does not forecast them. In the application the same lane can be re-run with your own distance, equipment, waiting time and labour base.

Other lanes

Need this for your own lanes?

1 — Frintelis, the platform

Model your own lanes, run sensitivity testing and export the breakdown for your tender file. Currently in an invitation-only pilot.

Request pilot access

2 — Advisory: tender and cost-model support

Should-cost positions for your lane set before quotes come in, and a structured read of the field once they do. Independent: not a 4PL, not a broker, no carrier commissions.

Email Gyorgy Connect on LinkedIn